PYLE Audio PLTVCP85 - Manual (Page 17)

16
SYMPTOMS
CAUSE POSSIBLE SOLUTIONS
Power indicated with
backlighting-unit will
not operate.
Poor video/snow
picture or line on
screen.
PLAY mode indicated
no audio or video
to TV.
(Unit in dew mode) Dew
feature activated
(see instruction manual)
No tape in unit.
Dirty heads.
VCR connected to A/V Input
jack, RCA patch cables
set in TV mode.
Retain power to recorder and
allow unit for a time to get rid
of moisture.
(After 30 minutes if dew
indicator is still on, completely
switch power off from unit and
resupply after a minute. This
can reset dew indicator if
moisture eliminated.)
Insert the tape.
Clean head using tape cartride
cleaner.
Switch TV to video mode with
remote control or switch behind
control door of TV.
Low voltage.
Start the vehicle, if not running.
VCR connected to A/V
output jacks. Change connections from A/V
out to A/V input.
Poor connection between
VCR output and TV input. Check connection.
Reversed A/V inputs to TV.
Check connection.