Pioneer DJM-900NXS-W - Manual (Page 22)

En 22
Category SW Name SW Type
MIDI Messages
Trigger/ Toggle Notes
MSB LSB
BEAT EFFECTS
c BTN Bn 4C MSB — — — Trigger/ Toggle OFF=0, ON=127
d BTN Bn 4D — — — — Trigger/ Toggle OFF=0, ON=127
AUTO/ TAP BTN Bn 45 dd — — — Trigger/ Toggle OFF=0, ON=127
TAP BTN Bn 4E dd — — — Trigger only OFF=0, ON=127
CUE BTN Bn 4B dd — — — Trigger/ Toggle OFF=0, ON=127
EFFECT SELECT
DELAY SW Bn 2A dd — — — 2 OFF=0, ON=127
ECHO SW Bn 37 dd — — — 2 OFF=0, ON=127
SPIRAL SW Bn 2B dd — — — 2 OFF=0, ON=127
REVERB SW Bn 36 dd — — — 2 OFF=0, ON=127
TRANS SW Bn 35 dd — — — 2 OFF=0, ON=127
FILTER SW Bn 3B dd — — — 2 OFF=0, ON=127
FLANGER SW Bn 32 dd — — — 2 OFF=0, ON=127
PHASER SW Bn 39 dd — — — 2 OFF=0, ON=127
ROBOT SW Bn 33 dd — — — 2 OFF=0, ON=127
MELODIC SW Bn 3D dd — — — 2 OFF=0, ON=127
SLIP ROLL SW Bn 3A dd — — — 2 OFF=0, ON=127
ROLL SW Bn 2E dd — — — 2 OFF=0, ON=127
REV ROLL SW Bn 2F dd — — — 2 OFF=0, ON=127
SND/ RTN
(MIDI LFO)
SW Bn 3E dd — — — 2 OFF=0, ON=127
CH SELECT
CH1 SW Bn 22 dd — — — 2 OFF=0, ON=127
CH2 SW Bn 23 dd — — — 2 OFF=0, ON=127
CH3 SW Bn 24 dd — — — 2 OFF=0, ON=127
CH4 SW Bn 25 dd — — — 2 OFF=0, ON=127
MIC SW Bn 26 dd — — — 2 OFF=0, ON=127
CF.A SW Bn 27 dd — — — 2 OFF=0, ON=127
CF.B SW Bn 28 dd — — — 2 OFF=0, ON=127
MASTER SW Bn 29 dd — — — 2 OFF=0, ON=127
MIDI LFO VR Bn 76 dd — — — — 0-127
QUANTIZE BTN 9n 76 dd — — — Trigger/ Toggle —
TIME SW Bn 0D MSB Bn 2D LSB —
TIME value (When FLANGER,
PHASER or FILTER is selected, the
value is halved. When a negative
value is selected, it is set to a posi-
tive value.)
LEVEL/ DEPTH VR Bn 5B dd — — — — 0-127
X-PAD VR Bn 74 dd — — — —
Sends the [X-PAD] position infor-
mation.
ON/ OFF
X-PAD (touch)
! When an effect other than
[SND/ RTN (MIDI LFO)] is
selected at BEAT EFFECT
BTN Bn 72 dd — — — 2 OFF=0, ON=127
ON/ OFF
X-PAD (touch)
! When [SND/ RTN (MIDI LFO)]
is selected at BEAT EFFECT
BTN Bn 40 dd — — — 2 OFF=0, ON=127
MIC
HI VR Bn 1E dd — — — — 0-127
LOW VR Bn 1F dd — — — — 0-127
SOUND COLOR
FX
NOISE BTN Bn 55 dd — — — Trigger/ Toggle 1 OFF=0, ON=127
SPACE BTN Bn 69 dd — — — Trigger/ Toggle 1 OFF=0, ON=127
GATE/ COMP BTN Bn 6A dd — — — Trigger/ Toggle 1 OFF=0, ON=127
DUB ECHO BTN Bn 6B dd — — — Trigger/ Toggle 1 OFF=0, ON=127
CRUSH BTN Bn 56 dd — — — Trigger/ Toggle 1 OFF=0, ON=127
FILTER BTN Bn 57 dd — — — Trigger/ Toggle 1 OFF=0, ON=127
Fader Start
Fader Start 1 BTN Bn 58 dd — — — Trigger/ Toggle OFF=0, ON=127
Fader Start 2 BTN Bn 59 dd — — — Trigger/ Toggle OFF=0, ON=127
Fader Start 3 BTN Bn 5A dd — — — Trigger/ Toggle OFF=0, ON=127
Fader Start 4 BTN Bn 5D dd — — — Trigger/ Toggle OFF=0, ON=127
HEADPHONES
MIXING VR Bn 1B dd — — — — 0-127
LEVEL VR Bn 1A dd — — — — 0-127
Timing Clock — F8 — — — — — — —
Fader Start
Fader Start 1 9n 66 dd — — — — BACK CUE = 0, PLAY = 127
Fader Start 2 9n 67 dd — — — — BACK CUE = 0, PLAY = 127
Fader Start 3 9n 68 dd — — — — BACK CUE = 0, PLAY = 127
Fader Start 4 9n 69 dd — — — — BACK CUE = 0, PLAY = 127
MIDI
START BTN FA — — — — — — —
STOP BTN FC — — — — — — —
1 When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons.
When there is no button that switches off, only the MIDI on message is sent from the button that was pressed.
2 When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions.
! When the [START/ STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot).
The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop.