Wall-mounting the surround speakers, Securing the front speakers – Pioneer S-RS3TB User Manual

Page 3

Advertising
background image

3

En

Connect to the speaker terminals on the rear of
the speakers.

• For S-RS7TB front speakers:

Unscrew the terminals on the speaker and insert the
striped speaker wire into the red (+) terminal and the
other wire into the black (–) terminal as shown below.

• For all other speakers:

To connect, insert the striped speaker wire into the
red (+) terminal and the other wire into the black (–)
terminal as shown below.

WALL-MOUNTING THE SURROUND
SPEAKERS

Before mounting

• Remember that the speaker system is heavy and that

its weight could cause the screws to work loose, or
the wall material to fail to support it, resulting in the
speaker falling. Make sure that the wall you intend to
mount the speakers on is strong enough to support
them. Do not mount on plywood or soft surface walls.

• Mounting screws are not supplied. Use screws

suitable for the wall material and support the weight
of the speaker.

• If you are unsure of the quality and strength of the

walls, consult a professional for advice.

• Pioneer is not responsible for any accidents or

damage that result from improper installation.

SECURING THE FRONT SPEAKERS

• Using the included screw, tightly secure the metal

catch to the backside of the speaker.

• Pass a commercially-available reinforced string

through the metal catch to securely support the
speaker to the wall. Be sure that the wall to which you
fasten the speaker is strong enough to support the
weight of the speaker. After fastening the speaker,
make sure that it does not fall over.

• The speaker can incur damage in the event of a fall.

• Do not attach the metal catch directly to the wall. It

should only be used in conjunction with reinforced
string to prevent the speaker from falling.

Pass two reinforced strings through the metal catches,
and fasten the speaker to the wall as shown above.

Striped half of speaker cable

Other half of speaker cable

red

black

Striped half of speaker cable

Other half of speaker cable

5 mm to 7 mm

5 mm

10 mm

Mounting screw

(not supplied)

Metal catches

Reinforced strings

Backside of speaker

S-RS3TB_7TB_En_1st.fm 3 ページ 2008年6月26日 木曜日 午前9時27分

Advertising
This manual is related to the following products: