Replacing hepa exhaust filter, Cleaning agitator – Panasonic MC-V7600 User Manual

Page 34

Advertising
background image

- 34 -

Replacing HEPA Exhaust Filter

The HEPA exhaust filter removes dirt
from recirculated air.

Check filter after emptying dust bin.
Replace when dirty.

To remove, pull out on both sides of
the exhaust filter cover
.

Grasp the exhaust filter and pull out
to remove
.

Ensure foam edge of the filter is
facing towards the vacuum cleaner
when placing filter into filter
compartment. Push only on filter
frame.

Reinstall exhaust filter cover by
snapping into place.

*

Filter cannot be cleaned and should
be replaced at least once each year.

Air

Flow

Exhaust Filter

Filtre

d’évacuation
Filtro de
salida

Exhaust
Filter Cover

Couvercle

du filtre
d’évacuation

Cubierta de

flitro de salida

Tabs

Languettes

Lengüetas

Air

Flow

Exhaust
Filter Seal

Sello gris de
filtro de salida

Joint du filtre

d'évacuation

Exhaust
Filter

Filtre

d’évacuation

Filtro

de escape

Ensure ON-OFF switch is OFF.
Disconnect power cord from outlet.

Clean agitator after every five uses.

Turn vacuum over, exposing the
agitator.

Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors
.

Cleaning Agitator

Advertising