General, Open the face plate, Close the face plate – Panasonic CQ-C5403U User Manual

Page 12: Face plate angle (tilt), Continued)

Advertising
background image

12

11

E

N

G

L

I

S

H

CQ-C5403U/C5303U

General

(continued)

Open the Face Plate

Press [u: Eject] (OPEN).

Note:
¡

The face plate automatically closes after a warning alarm
sounds if no operation is performed for approximately
20 seconds.

¡

When a disc is already loaded, the disc will be ejected
after the face plate fully opens.
(Disc Eject

a

Page 16)

Close the Face Plate

Press [u] (OPEN).

Face Plate Angle (Tilt)

Press and hold [u] (TILT) until you hear a beep (approxi-
mately 1 second) from the speaker output, then release it.
Set the face plate to the position at which it is easy to read
what is on the display. Each time the above operation is
repeated, the face plate angle changes in the sequence
shown below.

Note:
¡

The positions specified at “Face Plate Angle (Tilt)” are
memorized even after the following operations.

¡

Open/close

¡

ACC on/off

TILT 1
TILT 2
TILT 3

OPEN

TILT OFF

[D] (DISP/CLOCK)

[u: Eject]
(TILT/OPEN)

Caution

¡

Do not pinch your finger or hand in the face plate.

Advertising
This manual is related to the following products: