Planet Technology SGSW-2840 - Manual (Page 7)


5. Configure IP address
The SGSD / SGSW Managed Switch is shipped with default IP address as following.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follow:
Show the current IP address
1. On “Console#” prompt, enter “show ip interface”.
2. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 5-1.
Figure 5-1 Show IP information screen
Configure IP address
3. On “Console#” prompt, type “configure” to enter the configuration Mode.
4. On “Console (config)#” prompt, enter the following command and press
<Enter>. As show in Figure 5-2.
Console(config)# interface vlan 1
Console(config-if)# ip address 192.168.1.100 255.255.255.0