PYLE Audio LFH-9600 - Manual (Page 2)

2 Philips Pocket Memo 9600 digital recorder setup guide
© 2007 Recorders.com
This instructional guide walks you through the process of creating a Philips DPM-
9600 digital voice recorder profile within Dragon NaturallySpeaking v9.
Illustrated screen shots have been included for your convenience.
Preparing the recorder
1. Set the recording mode to HQ* for the best accuracy.
2. Set the microphone to “Dictate”.
3. Prior to creating your speech profile in Dragon NaturallySpeaking v9, make
sure you have already installed the Philips SpeechExec Pro Dictate. The
Security Dongle (Packaged with the Philips LHF-9600/10) is required for this
software installation
.
* The Philips LFH-9600/10 DPM has three modes, SP – Slow Play, LP – Long Play
and HQ – High Quality. You can only access the HQ mode if you set your software to
DSS Pro Mode. See manual for additional information.
Creating your Philips profile in Dragon NaturallySpeaking v9
1. Open Dragon NaturallySpeaking. On the DragonBar, select
NaturallySpeaking, then Open User. The Open User dialog box will open.
Select
. The following New User Wizard box will appear. Enter
your name and select your preferred language. In the Dictation Source,
select Digital recorder using sound files (.wav, mp3, .wma) on disk.