Panasonic CF-T2 Series - Manual (Page 31)

31
Security Measures
NOTE
z When the Supervisor Password has not been set, the User Password can not be set.
Set the Supervisor Password if you have not done so. ( Î page 29 )
z To disable the User Password, start up the Setup Utility with the Supervisor Password.
1
Run the Setup Utility. ( Î page 79 )
2
Using either Î or Í, select [Security].
3
Using either Ï or Ð, select [Set User Password] and press Enter .
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
Enter .
5
Enter your password at [Enter New Password] and press Enter .
z To disable the User Password
Press only
Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter .
z To disable the User Password
Press only
Enter.
7
At [Setup Notice], press Enter .
8
Press F10 and select [Yes], then press Enter .
CAUTION
z Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
z When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
Setting the User Password (enabling, changing, disabling)