Paradyne 7612 SNMP DSU - Manual (Page 99)

MIB Descriptions
C-13 7612-A2-GB20-10 November 1997
H
snmpInTraps (snmp 19)
H
snmpOutGetRequests (snmp 25)
H snmpOutGetNexts (snmp 26)
H
snmpOutSetRequests (snmp 27)
RS-232-Like MIB, RFC 1659
Supported for the User Data port and the Terminal port. RFC 1659 is an SNMPv2
MIB, but is converted to an SNMPv1 MIB to support this unit. This MIB consists of
one object and five tables.
H Number of RS-232-Like Ports Object.
H
General Port Table Objects.
H Asynchronous Port Table Objects. Not supported for the User Data port.
H
Synchronous Port Table Objects. Not supported for the Terminal port.
H
Input Signal Table Objects. Not supported for the Terminal port.
H
Output Signal Table Objects. Not supported for the Terminal port.
Number of RS-232-Like Ports Object
Supported as documented in the RFC.
General Port Table Objects
The General Port Table Objects contains configuration options for the
RS-232-Like interfaces. Clarification for objects contained in
Table C-8 as it
applies to the unit is provided below.
Table C-8. General Port Table Objects (1 of 2)
Object Description Setting/Contents
rs232PortType
(rs232PortEntry 2 ) Identifies the port hardware
type. Supports only the following values:
rs232(2) – Identifies the Terminal
port.
v35(5) – Identifies the synchronous
User Data port which is compatible
with the V.35 standard.
rs232PortInSig
Number
(rs232PortEntry 3 ) Contains the number of
input signals (in the input
signal table) that can be
detected. The value is 2 for synchronous user
data port and 0 for the Terminal port.