Panasonic EB-GD52 - Manual (Page 24)

Muting the Alarm
When the set time is reached the alarm will sound and the display will flash with an
alarm message. The alarm will sound for 30 seconds. If the alarm is due during a call,
it will activate vibration alert.
To end the alarm:
Press any key
Disabling the Alarm
1 From Idle mode press
B 413
to enter the Alarm Set menu and
press
B
2 Use
e
to select the alarm to be disabled and press
B
twice
3 Use
e
until Disabled is displayed and press
B
Once disabled, following the same procedure will re-enable the alarm.
Adjusting the Alarm Time
1 From Idle mode press
B 413
to enter the Alarm Set menu and
press
B
2 Use
e
to select the alarm to be adjusted and press
B
3 Press and hold
C
to remove the current alarm time
4 Enter the digits for the time and press
B
5 Press
e
to select the frequency of the alarm and press
B
6 Use
e
to select the ring type and press
B
Setting a Power On/Off Time
You can set your phone to turn itself on or off automatically at a specified time using
the Power On/Off feature. The procedure for setting/adjusting the Power On/Off
automatically is similar to that for setting the time on the clock. For either setting or
adjusting the time you need to select Power On Time or Power Off Time in the
Clock Function menu.
Caution: Ensure that the setting of the Power On function will not contravene any
regulations whereby it may automatically power on when in an aircraft or medical
facility etc. - see “Important Information” page 42.
20
Applications