Peavey SP 3X - Manual

SP ™ 3X
SPECIFICATIONS
Frequency response, 1 meter on-
axis, swept-sine in anechoic
environment:
54 Hz to 17 kHz (±3 dB)
Usable low frequency limit
(-10 dB point
):
47 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
Passive Mid/High Frequency Section:
150 W continuous
300 W program
600 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
99.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
Mid/High Frequency Section:
99.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
126.0 dB SPL continuous
132.0 dB SPL peak
Low Frequency Section:
127.0 dB SPL continuous
133.0 dB SPL peak
Passive Mid/High Frequency Section:
120.0 dB SPL continuous
126.0 dB SPL peak
Radiation angle measured at -6 dB
point of polar response:
90 degrees horizontal by
45 degrees vertical
Transducer complement:
Low Frequency Section:
1x 15 in. woofer, vented
1508-8 HE BWX
Mid Frequency Section:
1x 6.5 in. professional grade mid-
range
High Frequency Section:
1x .875 in. exit/51 mm voice coil
compression driver on CD Horn
RX
™ 22 on a CH ® 3 CD Horn
Box tuning frequency:
Low Frequency Section: 58 Hz
Crossover frequency (internal
passive):
Low Frequency - Mid Frequency:
800 Hz
Mid Frequency – High Frequency
2,000 Hz
Recommended active crossover
frequency region and slope:
Low Frequency – Mid/High Frequency:
750 Hz at 12 dB/octave
Time offset:
Low Frequency: 0.04 ms delay
Mid/High Frequency: 0.0 ms
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 5.4 Ω
Low Frequency:
Nominal: 8.0 Ω
Minimum: 6.9 Ω
Passive MF/HF:
Nominal: 8.0 Ω
Minimum: 6.2 Ω
Input connections:
2x 1/4 in. phone jack and 1x Neutrik ®
NL4 Speakon ® (bi-amp only)
Enclosure materials and finish:
3/4" OSB finished in black carpet
Mounting provisions:
This unit is not designed for overhead
suspension.
S P E C S
P E A V E Y E L E C T R O N I C S