Pioneer DVD-R Drive DVR-S201 - Manual (Page 7)

7
<DRC1101>
En
English
Rear Panel
PART NAMES AND FUNCTIONS
1 Disc tray
Place the disc on the tray with its label side facing up (Operate
with the OPEN/CLOSE button)
2 Filter cover
Sliding the filter cover to the right and then removing it will
expose the filter located to the rear of the cover. Note that the
ventilation holes located on the cover are designed to prevent
the drive from overheating, and that the drive should be
placed so that these ventilation holes remain unblocked, as
failing to do so may result in breakdown or malfunctioning.
3 Power indicator
Lights when the power has been turned ON
4 DISC indicator
Lights when a disc has been inserted
Front Panel
When tray is opened or closed
DVD-ROM disc
DVD-R disc
Unsupported disc
5 Operation (READ/WRITE) indicator
Operation status is indicated as follows:
6 OPEN/CLOSE ( 0) button
Opens and closes the disc tray
7 POWER switch
Turns the power ON and OFF
8 SCSI ID switch
Sets the device’s SCSI ID
9 TERMINATION switch
Turns the device’s SCSI termination ON and OFF
0 AC inlet (AC IN)
Provides a connection point to a wall outlet (AC 100 to 240 V;
50/60 Hz) when the accompanying power supply cord is used
- SCSI connectors
Two SCSI amphenol 50 P connectors are provided for SCSI
chain connection (either connector may be used)
During reading
During writing
When an error occurs
• Abnormal rise in
internal temp
• Lens or disc dirty
• Other error
DVD-R DRIVE
DISC READ/WRITE
DVR-S201
R
1
4 5 6 7
2 3
AC
IN
SCSI
ID
TERMINATION
ON OFF
SCSI
8 9
0 -
Blinks green
Lights green
Lights orange
Blinks orange
Lights green
Lights orange
Blinks orange
• Blinks 1x and then repeats
• Blinks 2x and then repeats
• Blinks 3x and then repeats