Polaroid PLA-4250A - Manual (Page 14)

14
4. Connect power cables
Connect the power cord to the product then to a properly grounded AC outlet.
5. Turn Power On
Press the AC switch to “I”. Then press the Power ON button on the front of the unit, or press
the red Power ON button on the remote control.
6. Select Input Source
Select input source for your product, via either the OSD menu or remote control. If connecting
to Antenna, Cable or other RF source on TV1 or TV2 Inputs, see next page to configure the
inputs.
If connecting to a VGA PC computer input, go to page 20 for the configuration menu.