Screen indications in the recording mode – Panasonic VQT2H52 User Manual

Page 43

Advertising
background image

43

VQT2H52

Still pictures can be recorded while recording the motion picture. (

l 48)

≥ The images recorded between pressing the recording start/stop button to start recording and

pressing it again to pause recording become one scene.

≥ Maximum number of recordable scenes: 3900

Maximum number of different dates: 200 (

l 74)

When either of them reaches to the maximum limit, additional scenes cannot be recorded.
(In the case of SD cards it is the maximum number of recordable scenes per card.)

≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every

4 GB of data when played back with another device.

Screen indications in the

recording mode

A Recording mode
B Remaining time left for recording

(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)

C Recording time elapsed

Each time the unit is put into recording
pause, the counter display will be reset to
“0h00m00s”.

About the compatibility of the recorded motion pictures

≥ They are not compatible with devices other than those that support AVCHD. Images cannot be

played with equipment that does not support AVCHD (ordinary DVD recorders). Confirm that your
equipment supports AVCHD by referring to the operating instructions.

≥ There are some cases where the recorded motion pictures cannot be played back, even if the

device supports AVCHD. In such cases, play the recorded motion picture with this unit instead.

0h00m00s

0h00m00s

0h00m00s

R 1h20m

R 1h20m

R 1h20m

HG

HDCSD10_TM10_TM15P-VQT2H52_eng.book 43 ページ 2009年7月6日 月曜日 午後1時46分

Advertising