Panasonic KX-PW102CW - Manual (Page 22)

22
Operation indicator and warning beep
When scanning documents, check the operation indicator light.
Operation
Indicator
Green light
Slow flash
Green light
Fast flash
Warning Beep
No beep
No beep
Green light
ON
No beep
Situation
The document is being scanned properly.
(Fine letter mode)
The document is being scanned properly.
(Standard letter mode)
The hand scanner has temporarily stopped during scanning.
You did not move the hand scanner for more than 30 seconds, so it has stopped scanning
automatically.
Red light
ON
Red light
ON
Light OFF
Light OFF
No beep
1 beep
3 beeps
No beep
The hand scanner is being moved quickly.
(The document is being scanned.)
The hand scanner is being moved too quickly.
(Some parts of the document may not be scanned, or the scanned contents may be too
compressed.)
The scanner memory is full.
(The memory indicator green light will flash fast.)
You have scanned a document that is more than 1.5 m in length as 1 page.
Scan the document as 2 pages or more.
The scanner is not in operation.
Memory indicator
Shows the amount of scanner memory being used.
Memory indicator
(green light)
OFF
ON
Flash slow
Flash fast
Memory used
0%
66%
99%
100%
Using the hand scanner
Memory indicator
Operation indicator