ProMaster INFINITY ELITE ELX 15-45X65 - Manual (Page 3)

3. Do not drop the spotting scope or subject it to strong vibration, impact or pressure.
4. Never expose the spotting scope to high temperatures (over 60°C or 140°F). Avoid leaving the spotting scope for an
extended period of time in a hot humid place such as in a car parked in the sun or near any high heat source as this
could cause the spotting scope to become deformed.
5. Do not use the spotting scope under the water. While your spotting scope is waterproof and can be submersed,
submersion to a depth greater than the specification or longer than the specification will cause permanent damage and
will void the warranty. When splashed with salt water, wipe the scope with a clean cloth moistened with fresh water.
6. Your spotting scope is waterproof and weather-resistant. After use, any moisture on your scope should be wiped away
with a dry cloth. Do not wipe your scope with thinner, alcohol, benzene nor any other chemical. In the case of dust or
water on the lens, use a blower like the PROMASTER Hurricane Blower or a lens cleaning cloth like the PROMASTER
SoftClean cloth. In the case of any oily substance like fingerprints, a small amount of high quality lens cleaning
solution like PROMASTER OpticClean fluid can be used on a high-grade lens tissue like PROMASTER OpticClean
tissue to gently remove the substance.\
7. Your spotting scope should always be stored in a clean, dry, well-ventilated environment. Never store it with mothballs
or in an environment where chemicals are handled.
USER WARNING
1. NEVER look at the sun with the spotting scope. This will cause serious damage to the retina or total loss
of eyesight.
2. Do not leave the spotting scope under direct sunlight. Sun rays passing through the scope will be greatly
intensified and a fire may occur if the rays are focused on any flammable material.
Specifications :
Type Porro-prism angle type
Body construction Magnesium alloy body
Magnification 15x – 45x
Objective lens 65mm diameter Extra Low Dispersion (ED) glass
Lens coating Fully broadband multi-coated on all optical surfaces
First objective lens coating Repellamax™ element repellant coating
Field of view @ 1000m 57m – 27m
@ 1000yds 171ft – 81ft
Exit pupil aperture 4.3mm – 1.4mm
Eye Relief 16mm – 19mm
Focus range 3m to infinity
3.3yds to infinity
Waterproof (without eyepiece) 1/2m depth for 2 min
Weatherproof Nitrogen filled fog proof
Body length (Without Eyepiece H-24.3 x 300mm / 9.6 x 11.8inch.
Body Weight 1.26kg. / 2.78 lbs
Accessories Objective lens cap
Body fit vinyl pouch
SLR camera T-mount adapter