Polycom 52PFL7403D - Manual (Page 33)

ENGLISH
FRANÇAISE
ESP
AÑOL
EN-31
S-Video - Good quality
An analog connection, S-Video provides better picture quality than
composite video. When connecting your device with S-Video, plug the
S-Video cable to the S-Video connector on the side of the TV. You must
connect a separate Audio L/R cable from the device to the red and
white Audio L/R in/out connectors on the side of the TV.
S-Video cable Audio L/R cable
- Red, White
Composite - Basic quality
Composite video provides basic analog connectivity, usually combining
a (yellow) video cinch cable with (red and white) Audio L/R cinch cable.
Match the cable colors when connecting to the composite video and
audio L/R input connectors on the side of the TV.
Composite audio/video cable
- Yellow, red and white
8.3 Label your connections
When you connect devices, you can label the connections to help you
to later identify where devices are connected.
Press 1. MENU on the remote control and select Installation >
Source Labels.
Source labels
AV1
AV2
AV3
HDMI1
HDMI3
HDMI2
Side HDMI
Installation
TV menu
Language
Channels
Preferences
Source labels
Reset AV settings
Software upgrade
Side AV
Clock
Press 2. Æ to enter the list of available connections.
Press 3. Î or ï to highlight a connection in the list.
Press 4. Æ to enter the list of devices for the connection, and press Î
or ï to highlight a device.
Press
5. Í to confirm your choice.
Press 6. MENU to exit.
8.2 Select your connection quality
This section describes how you can enhance your audio visual
experience by connecting your devices with the best possible
connectors.
HDMI - Highest quality
HDMI produces the best audio visual quality possible. Both audio
and video signals are combined in one HDMI cable, providing an
uncompressed, digital interface between your TV and HDMI devices.
You must use HDMI to experience full high definition video. You must
also use HDMI cables to use Philips EasyLink as described in Use Philips
EasyLink on page 26.
Use only a certified HDMI cable.
Tip E
If your device only has a DVI connector, use a DVI-HDMI adaptor to
connect your device to a HDMI connector on the TV. As such a con-
nection does not support sound, you must connect a separate audio
cable from the device to the Audio L/R input connectors on the TV.
D Note
Philips HDMI supports High-bandwidth Digital Contents Protection
(HDCP). HDCP is a form of Digital Rights Management that
protects high definition content in DVD or Blu-ray discs.
Component (YPbPr) - High quality
Component (Y Pb Pr) video provides better picture quality than
S-Video or composite video connections. Though component video
supports high definition signals, picture quality is lower than HDMI and
is analog.
When connecting a component video cable, match the cable colors to
the connectors on the back of the TV. Also, connect an Audio L/R cable
to the red and white Audio L/R input connectors.
Component video
cable
- Red, Green, Blue
Audio L/R cable
- Red, White