Parasound JC 1 Amplifier User Manual
Page 9
Advertising
If you want to automatically turn on the JC 1 with an external DC voltage, select the DC trigger by
moving the
Auto Turn On
switch on the rear panel left to its
12 Volt Trigger
position.
What you’ll need:
A wire with a 2.5 mm sub-mini plug on each end (provided)
A “control” component with +9Vdc to +12 Vdc trigger voltage
Before Connecting
Remove power to all the components in your audio system.
Make sure the
Auto Turn On
switch on the rear panel is in its
12 Volt Trigger
Advertising