Front panel, Controls and displays, English – Pioneer VSX-C301 User Manual
Page 17: Controls and displays 04, Chapter 4
Controls and displays
04
17
En
English
Chapter 4
Controls and displays
Front panel
1
PHONES jack
When headphones are connected there is no sound
output from the speakers.
2
STANDBY/ON button
Press to switch the receiver on or into standby.
3
FRONT INPUT jacks
(page 13)
Use to connect an audio/video component.
4
AV DIRECT indicator
(page 33)
Lights in standby when the receiver is passing an audio/
video signal from one SCART AV connector to another.
5
Digital surround format indicators
2
DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
6
Listening mode indicators
STEREO indicator
(page 23)
Lights when the source is stereo and/or the listening
mode has been set to
STEREO
.
2
PRO LOGIC II indicator
(page 23)
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
ADVANCED indicator
(page 24)
Lights when one of the Advanced Surround modes is
active.
PHONES indicator
(page 23)
Lights when phones surround mode is active.
SOUND MODE indicator
(page 24)
Lights when one of the Sound Modes is active.
7
Remote control sensor
8
INPUT SELECTOR knob
(page 22)
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
9
MASTER VOLUME knob
Use to adjust the volume.
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-C301
SOUND MODE
INPUT SELECTOR
MASTER
VOLUME
PHONES
ADVANCED
STEREO
AV DIRECT
FRONT INPUT
STANDBY/ON
DIGITAL IN
PHONES
VIDEO
AUDIO
R
L
DTS
2
PRO LOGICII
2
DIGITAL
DOWN
UP
R
1
2
3
5
6
4
8
9
7
vsx-c301.book 17 ページ ２００３年２月６日 木曜日 午後５時４分