Panasonic PT-DW8300U - Manual (Page 106)

NETWORK menu
106
- ENGLISH
Settings
J
Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.
Time zone selection
Button to update time zone setting
Turn this [ON] to set the date and time
automatically.
When setting the date and time automatically,
input the IP address or name of the NTP server.
(When inputting the server name, the DNS server
must be set.)
New date field
New time field
Button to update time and date settings
Note
If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed. z
Contact the dealer where you bought the projector to have the battery changed.
J
Network config page
Click [Detailed set up], then [Network config] to display the Network config page.
If [Network config] is clicked, the "CAUTION!" screen is displayed. z
If the [Next] button is clicked, the current settings are displayed. z
If the [Change] button is clicked, the following setting change screen is displayed. z
Enter the name of the projector here. Enter the
host name here if it is required when the DHCP
server is going to be used, for instance.
Set this to ON to enable the DHCP client function.
Enter the IP address if DHCP server is not used.
Enter the SUBNET MASK if DHCP server is not
used.
Enter the gateway address if DHCP server is not
used.
DNS server address (primary) field
Available input characters:
Numeric characters (0 - 9), period (.)
(Example: 192.168.0.253)
DNS server address (secondary) field
Available input characters:
Numeric characters (0 - 9), period (.)
(Example: 192.168.0.254)
When all options are filled, click [NEXT]. The
confirmation screen will be displayed.
Click [Submit] button to update.