Polaroid FLM-2625 - Manual (Page 23)

Basic Operations
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the or to change channels.
When you press the
CH+ CH-
CH+ CH- or , the unit changes channels in sequence. You will see all the channels that the unit has memorized.
You will not see channels that were erased.
Direct Accessing Channels
Press the to go directly to a channel. number buttons
To select a one-digit channel: press the to input the channel number, followed by ENTER button or wait for some
seconds, and the unit automatically goes to the selected channel
0-9 number buttons
.
To select a two-digit channel: press the to input the channel number and the unit goes to the selected channel .
To select a three-digit channel: press the to input the channel number and the unit goes to the selected channel (Only
in CABLE mode
0-9 number buttons
0-9 number buttons
).
When you use the number buttons, you can directly select channels that were erased.
Note:
Using the LAST button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the Mute
Using the volume buttons (VOL+ and VOL-)
Press the or to or the volume. VOL + VOL- increase decrease
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
Press the MUTE button and the sound cuts off.
1
To turn mute off, press the MUTE button again.
2
20