Panasonic SC-AK220 - Manual (Page 4)

RQT7528
4
4
AC power supply cord
Note
The included AC power supply cord
is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s
memory, except for time, remains
intact for up to a week after the AC
power supply cord is disconnected.
2
AM loop antenna
Stand the antenna up
on its base.
(R) (L)
1
FM indoor antenna
Adhesive tape
Affix where
reception is best.
(L) (R)
R L
Set-up
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
3
Speakers
Placement
Caution
• Use the speakers only with the recommended system. Failure to do
so may lead to damage to the amplifier and/or the speakers, and
may result in the risk of fire. Consult a qualified service person if
damage has occurred or if you experience a sudden change in
performance.
• Do not attach these speakers to walls or ceilings.
Speakers are designed identically so that
no left or right channel orientation is
necessary.
Note
•
Keep your speakers at least 10 mm ( 13 / 32 ˝)
away from the system for proper ventilation.
•
These speakers do not have magnetic
shielding. Do not place them near
televisions, personal computers or other
devices easily influenced by magnetism.
•
You cannot take the front net off the
speakers.
Use only the supplied speakers.
The combination of the main unit and
speakers provide the best sound. Using
other speakers can damage the unit and
sound quality will be negatively affected.
Connection •
An analog player with a built-in phono
equalizer can be connected.
•
For details, refer to the instruction manual
of the units which are to be connected.
•
When units other than those described
above are to be connected, please
consult your audio dealer.
External unit (optional)
Analog player (not included)
ME MO RY
Red (+)
Black
Red
Black (–)
1
3
2
Connect the left (L)
side in the same way.