Caution: to avoid battery leakage, Important: battery information, Caution – Playskool 8979 User Manual

Page 2

Advertising
background image

TO INSERT BATTERIES

Use a Phillips/cross head

screwdriver (not included)

to loosen screw in battery

compartment door (screw

remains attached to door).

Remove door. Insert 3 x 1.5V

“AA” or R6 size batteries. Alkaline

batteries recommended. Fit

door onto unit, then close door.

Tighten screw.

1. To turn the toy on, slide the switch on

side of drum to Band or Animal sound

mode. (See icons.)

2. To start background tune, gently rock

the drum. The rocking motion will activate the tune.

3. The three cushy bags show instruments and animals. These correspond

with the sounds you’ll hear when they are placed in the drum.

4.

Simply drop a cushy bag into the drum to hear the sound associated

with the picture. The new sound will be added to the background

tune. Each cushy bag adds a different sound, themed to your

selected mode, for countless musical combos! When you remove a

cushy bag from the drum, the sound associated with it stops.

PLAY FEATURES

With the MELODY MIXIN’ DRUM, you and your baby can create a

playroom concert together. See your LET’S PLAY TOGETHER tip

card (included) for even more play activities and ideas!

To Play

Trumpet / Lion Xylophone / Elephant Drum / Monkey

Band/Off/Animal

CAUTION: TO AVOID BATTERY LEAKAGE

1. Be sure to insert the batteries correctly and always follow the toy and

battery manufacturers’ instructions;

2. Do not mix old and new batteries or alkaline, standard (carbon-zinc)

or rechargeable (nickel-cadmium) batteries;

3. Always remove weak or dead batteries from the product.

IMPORTANT: BATTERY INFORMATION

Please retain this information for future reference.
Batteries should be replaced by an adult.

CAUTION:

1. Always follow the instructions carefully. Use only batteries specified and be sure

to insert item correctly by matching the + and – polarity markings.

2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline

batteries.

3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short circuit the supply terminals.
6. Should this product cause, or be affected by, local electrical interference, move it

away from other electrical equipment. Reset (switching off and back on again or

removing and re-inserting batteries) if necessary.

7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery.

Always remove from the product before recharging. Recharge batteries under

adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.

Advertising