Specifications – Pioneer PRS-D5000SPL User Manual

Page 15

Advertising
background image

Specifications

14

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

Power source .......................................................................................................... 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption ........................................................................................................ 70 A (at continuous power, 4

Ω)

Average current drawn* ........................................................................................................ 10.6 A (4

Ω for one channel)

15.6 A (2

Ω for one channel)

Fuse ............................................................................................................................................................................ 150 A
Dimensions ...................................................................................................................... 300 (W)

× 64 (H) × 330 (D) mm

Weight .................................................................................................................... 7.3 kg (Leads for wiring not included)
Maximum power output ........................................................................................ 1,500 W

× 1 (4 Ω) / 3,000 W × 1 (2 Ω)

Continuous power output ............................................ 1,100 W

× 1 (4 Ω) / 1,950 W × 1 (2 Ω) (DIN45324, +B=14.4 V)

Load impedance .................................................................................. 4

Ω (2 — 8 Ω allowable), (Ex. Bridge 4 — 16 Ω)

Frequency response .............................................................................................................. 10 — 240 Hz (+0 dB, –1 dB)
S/N ratio ........................................................................................................................................ 90 dB (IEC-A network)
Distortion ........................................................................................................................................ 0.05 % (50 W, 100 Hz)
Low pass filter ................................................................................................................ Cut off frequency: 40 — 240 Hz

Cut off slope: –18, –24 dB/oct

Subsonic filter (HPF) .............................................................................................................................. Frequency: 20 Hz

Slope: –18 dB

Bass boost ................................................................................................................................................ Level: 0 — 12 dB

Frequency: 40 — 120 Hz

Phase control ........................................................................................................................................ SYNC, SYNC INV
Gain control .............................................................................................................................................. 200 mV — 6.5 V
Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 k

Note:

• Specifications and the design are subject to possible modification without notice

due to improvements.

*Average current drawn

• The average current drawn is nearly the maximum current drawn by this unit

when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.

Advertising