Pioneer DV-220KV-K - Manual (Page 12)

En 12
<J2M10501A> 12
Playing files stored on USB
devices
 The player may not recognize the USB device, may
not play files or may not supply power to the USB
device. For details, see When a USB device is con-
nected on page 19.
 Pioneer does not support that all files recorded on
all USB devices will play or that power will be sup-
plied to the USB device. Also note that Pioneer will
accept no responsibility whatsoever for loss of files
on USB devices caused by connection to this player.
1 Turn the power on.
Press  STANDBY/ON.
2 Switching the input to the USB mode.
Press DVD/USB.
USb is displayed on the front panel display.
3 Connecting USB devices.
The Disc Navigator appears automatically.
Player’s front panel (DV-220KV-K)
USB device
To USB port
4 Starts playback.
Use / / /  to select the file, then press ENTER.
 Turn the power off before removing the USB device.
 The input will remain in the USB mode the next time
the power is turned on. To return to the DVD mode,
press DVD/USB (or press  OPEN/CLOSE to open
the disc tray).
Recording audio CD tracks
on USB devices
 The tracks of audio CDs loaded in the player can be
recorded on a USB device connected to the USB
port.
 It may not be possible to record tracks of audio CDs
on a USB device. For details, see When a USB device
is connected on page 19.
Selecting the track(s) to be
recorded
1 Load the audio CD.
 If playback starts automatically, press  STOP
to stop playback.
2 Display the Home Menu.
Press HOME MENU.
3 Select CD -> USB Rec.
Use / / /  to select, then press ENTER.
Start
Selected Track
Total Time
 00
 000:00
Select Track
Bitrate
Individual
Select All
All Clear
 01:43
 03:17
 04:18
 04:59
 04:20
 04:38
 04:40
 04:11
Track 1–13
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
CD –> USB Rec
4 Select Select Track  Individual  the
track(s) you want to record.
Use / / /  to select.
 Individual: Select 1 track at a time.
 Select All: Select all the tracks.
 All Clear: Deselect all the tracks.
5 Select Bitrate (transfer rate).
Use / / /  to select, then press ENTER.
 Select 128kbps, 192kbps or 320kbps.
6 Start recording.
Use / / /  to select Start, then press ENTER.
Notes
 The audio signals are converted into MP3 format for
output.
 CD -> USB Rec can only be selected when the audio
CD is stopped.
 When recording is completed, a folder named
“PIONEER” is automatically created on the USB
device. The recorded tracks are stored in this folder.