Initial setting, Set answering, Recording time – Panasonic KX TG2258PW User Manual

Page 20: Preparing the answering system, Caller’s recording time

Advertising
background image

Preparing the Answering System

20

Pre-recorded greeting

If you do not record a greeting (p. 19), one of two greetings will be played when a
call is received, depending on the caller’s recording time (see below).

To check the pre-recorded greeting,

press

[GREETING CHECK]

.

• A pre-recorded greeting will be played as follows:

When the recording time is set to “1 minute”, “2 minutes” or “3 minutes”:

Hello, we are not available now. Please leave your name and phone number after the

beep. We will return your call.

• If recording time runs out, the unit will automatically switch to the “Greeting

only” mode (see below), and no new messages will be recorded.

When the recording time is set to “Greeting only”:

Hello, we are not available now. Please call again. Thank you for your call.

Caller’s Recording Time

You can select “1 minute”, “2 minutes”, “3 minutes” or “Greeting only” for the caller’s
recording time. The factory preset is “3 minutes”.

Flash Memory Message Backup (Message storage)

Messages stored in memory will not be affected by power failures. All messages
are saved until you erase them.

1

Press

[MENU]

.

2

Scroll to “

Initial setting

” by pressing

[ ]

or

[ ]

, then press

Select

.

3

Scroll to “

Set answering

” by pressing

[ ]

or

[ ]

, then press

Select

.

4

Scroll to “

Recording time

” by pressing

[ ]

or

[ ]

, then press

Select

.

5

Select the recording time by pressing

[ ]

or

[ ]

.

• You can also select the recording time by pressing

dialing buttons

[1]

,

[2]

,

[3]

or

[0]

(Greeting only).

6

Press Save, then press [OFF].

• When “Greeting only” is selected, the unit will answer calls by playing the

greeting message, then hang up. The unit will not record any incoming
messages.

• If you change the recording time to “Greeting only” when there are no new

messages stored in the Answering System, the number of messages will
disappear from the base unit display.

Handset

>

>

Initial setting

Exit

Select

>

>

>

>

Set answering

Back

Select

>

>

>

>

Recording time

Back

Select

>

>

>

>

Recording time
:3min

Back

Save

>

>

Advertising
This manual is related to the following products: