Sensitivity – Panasonic DMC-LZ5 User Manual

Page 63

Advertising
background image

Menu Settings

63

VQT0U87

1 Press

3 [

] several times until

[WB ADJUST.] appears and then
press

2 1 to adjust the white

balance.

2 [RED]: Press when the hue is

bluish.

1 [BLUE]: Press when the hue is

reddish.

• Select [0] to return to the original white

balance.

2 Press [MENU/SET] to finish.

• You can also press the shutter

button halfway to finish.

About the white balance
• When you take a picture with the flash, the

white balance is automatically adjusted
[except for [

] (Daylight)]. However, the

white balance may not be properly
adjusted if the flash level is insufficient.

• The white balance cannot be set in simple

mode [

] and scene mode.

About the white balance fine adjustment
• You can finely adjust the white balance

independently for each white balance
item.

• The white balance icon on the screen

turns red or blue.

• The white balance fine adjustment setting

is reflected in the picture when using the
flash.

• The white balance fine adjustment setting

is memorized even if the camera is turned
off.

• The white balance fine adjustment level in

[

] (White set) returns to “0” when you

reset the white balance using White set
[

].

• You cannot finely adjust the white balance

when [COL.EFFECT] (P68) is set to
[COOL], [WARM], [B/W] or [SEPIA].

Press [

] to display the [REC] mode

menu and select the item to set. (P61)
ISO is a measure of sensitivity to light. The
higher the sensitivity is set, the less light is
needed to take a picture so the camera
becomes more suitable for recording in
dark places.
• When [AUTO] is selected, the ISO

sensitivity automatically increases to a
maximum of [ISO200] (or [ISO400] when
the flash is activated) depending on the
brightness.

• ISO sensitivity is automatically set to the

optimal value between [ISO800] and
[ISO1600] in [HIGH SENS.] (P55) in
scene mode.

• To avoid picture noise, we recommend

decreasing the ISO sensitivity or setting
[PICT.ADJ.] to [NATURAL]. (P68)

BLUE

RED

WB ADJUST.

SELECT

EXIT

MENU

[SENSITIVITY]

Setting the light sensitivity

ISO sensitivity

80

400

Use in bright
places
(e.g. outdoors)

Suitable

Not

suitable

Use in dark
places

Not

suitable

Suitable

Shutter speed

Slow

Fast

Noise

Less

Increased

MENU

SET

VQT0U87ENG.book 63 ページ 2005年12月27日 火曜日 午後7時12分

Advertising
This manual is related to the following products: