Panasonic KX-TD1232 - Manual (Page 105)

1.8 Operator / Manager Service Features
Operations 1-97
Operator / Manager
/ DSS Console Operations
• Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM” or
press the PROGRAM button on the KX-T7300 series.
• After programming, return the MEMORY switch to the “SET” position or press the
PROGRAM button on the KX-T7300 series.
• The extension number is displayed in the order of the jack number when you press the
NEXT or PREV button.
• To erase an incorrect entry, press the CLEAR (TRANSFER) button and enter a new
number.
• 1.7 Useful Features, “Calling Using Your Privileges at Another Extension (Walking COS)”
• See the Installation Manual, Section 3, “Extension Password/System Password”.
• See the Installation Manual, Section 3, “Walking COS”.
! !
☞
Extension Password Set (Manager only)
The manager can assign a password to each extension. The assigned password can be used for
the Walking COS feature.
Setting
PT
Dial 7. Enter the system
password (4 digits).
7 password
Press
AUTO DIAL/STORE.
AUTO DIAL
STORE
SP-PHONE
Press
SP-PHONE
(NEXT). Enter the
password
(4 digits).
password
Press
AUTO DIAL/STORE.
AUTO DIAL
STORE
Press SP-PHONE (NEXT)
or REDIAL (PREV) and
select the extension you
want to assign.
Repeat these steps.
SP-PHONE
REDIAL
• You may enter the pre-assigned extension
password (4 digits) of extension jack 01
instead of the system password.