Remote control – Polaroid TTM-2004 User Manual

Page 6

Advertising
background image

5

Number Keys

Two keys must be pressed to
select a channel when when
ANTENNA is se to AIR. For
channels 2 through 9, press 0
first,then the channel number
(for example, 02,12). Three keys
must be pressed when you se-
lect a channel under 20 when
ANTENNA is set to CABLE. For
channels above 19, you can
press their digit number directly.
For example, 001, 019, 20, 100.

Mute Key

Press once to turn off the
volume
Press again to restore

Code Key

Modify the password for entering
P.LOCK. (Please see page 11)

VOL

/

Key

Use VOL / key to increase/
decrease the volume.

Power key

Timer Key

Use this key to select the
sleep timer

Display Key

Use this key to display the
current channel information
(such as channel, time, etc.),
press it again to exit.

Picture Key

Press this key to cycle
the following states:
DYNAMIC, SOFT,
STANDARD, PERSONAL.

TV/AV Key

TV/AV( swap between TV
and AV.)

Q.View Key

Use this key to shift be-
tween two channels. When
you use number keys to
select the first channel,
then the second channel,
you can press Q.VIEW to
switch between these two
channels.

Program UP/DOWN
Key

Menu Key

Use this key with the PROG.

/

and VOL / keys to adjust fea-
tures of the on-screen menu sys-
tem.

Remote control

Loading batteries: Remove the lid of the battery compartment, insert 2 size AAA
batteries with the polarities as indicated inside the compartment and replace the
lid.
Note:

1. Batteries will last typically last about 1 year under normal use.
2. If you do not intend to use the remote control for a long period of time,

remove the batteries to avoid damage due to leakage.

Advertising