Palm TreoTM - Manual (Page 3)

Treo ™ Wireless Headset 3
Pairing with your Bluetooth phone
Your headset comes with an AC charger and plugs that are
compatible with international outlets. You can use the same charger for both your
headset and your Treo™ 650 smartphone, so you do not need to carry two
chargers when you travel.
0
You are now ready to pair the headset with your mobile phone. If the headset has
already been paired with your phone, then you can begin using it.
Pairing with your Bluetooth phone
Pairing creates a unique and encrypted wireless link between two devices
enabled with Bluetooth wireless technology, such as your Bluetooth phone and
Bluetooth headset.
Your headset is compatible with most Bluetooth phones that are compliant with
the Bluetooth version 1.1 or 1.2 specification. Visit your phone manufacturer’s
website to make sure that your phone has Bluetooth capability.
1
Plug the AC charger into an electrical
outlet, and then into the headset’s
charging connector. The blue indicator
light remains lit while the headset is
charging.
2
Charge for 2 hours, and then remove
the AC charger from the headset. The
blue indicator light turns off when the
headset is fully charged.
NOTE
Paloma_UG.book Page 3 Wednesday, December 22, 2004 11:14 AM