Pioneer VSX-416-S/-K - Manual (Page 53)

Additional information 11
53
En
English
Français
Deutsch
Nederlands
Italiano
Español
Specifications
Amplifier section
• Continuous power output (stereo)
Front . . . . . . . 100 W (DIN 1 kHz, THD 1.0 %, 8 Ω )
• Maximum Power output (surround)
Front
. . . . . . 130 W per channel (1 kHz, THD 10 %, 8
Ω )
Center . . . . . . . . . . 130 W (1 kHz, THD 10 %, 8 Ω )
Surround . . . . . . . . . . . . . . . . .130 W per channel
(1 kHz, THD 10 %, 8 Ω )
Surround Back (VSX-516 model only)
. . . . . . . . . . . . . . . . 130 W (1 kHz, THD 10 %, 8
Ω )
Audio section
• Input (Sensitivity/Impedance)
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . . .200 mV/47 k
Ω
• Frequency response
CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD,
TV/SAT . . . . . . . . . . . . . . 5 Hz to 100 000 Hz dB
• Output (Level/Impedance)
DVR/VCR REC, CD-R/TAPE/
MD REC . . . . . . . . . . . . . . . . . . . . . 200 mV/2.2 k
Ω
• Tone control
Bass . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz)
Treble . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz)
Loudness . . . . . . +10 dB/+5 dB (100 Hz/10 kHz)
(at volume level –50 dB)
• Signal-to-Noise Ratio DIN (Continuous
rated power output / 50 mW)
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . . . . 88 dB/64 dB
• Signal-to-Noise Ratio (IHF, short circuited,
A network)
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . . . . . . . . . . 96 dB
• Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
CD, DVR/VCR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . . . . . . . . . . 79 dB
Video Section
• Input (Sensitivity/Impedance)
DVR/VCR, DVD/LD, TV/SAT . . . . . . . . 1 Vp-p/75 Ω
• Output (Level/Impedance)
DVR/VCR, MONITOR OUT . . . . . . . . . 1 Vp-p/75 Ω
• Frequency response
DVR/VCR, DVD/LD,
TV/SAT MONITOR . . . . . . 5 Hz to 7 MHz dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . 55 dB
Crosstalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB
FM Tuner Section
Frequency Range . . . . . . . . 87.5 MHz to 108 MHz
Usable Sensitivity . . . . . . . . . . Mono:13.2 dBf, IHF
(1.3 µV/75 Ω)
50 dB Quieting Sensitivity . . . . . . Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio . . . Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion. . . . . . . . . . . . . . . .Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity . . . 60 dB (400 kHz)
Stereo Separation . . . . . . . . . . . . . . . 40 dB (1 kHz)
Frequency Response . . . . . . . . . . 30 Hz to 15 kHz
(±1 dB)
Antenna Input (DIN). . . . . . . . . .75 Ω unbalanced
AM Tuner Section
Frequency Range
9 kHz step . . . . . . . . . . . . . 531 kHz to 1602 kHz
10 kHz step . . . . . . . . . . . . 530 kHz to 1700 kHz
Sensitivity (IHF, Loop antenna) . . . . . . . 350 µV/m
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . 50 dB
Antenna . . . . . . . . . . . . . . . . . . . . . . Loop antenna
Miscellaneous
Power requirements
Black model. . . . . . .AC 110 V/AC 120 V to 127 V/
AC 220 V/AC 240 V, 50 Hz/60 Hz
Silver model
Australia model. . . . . . . . . . . . . . AC 240 V, 50 Hz
All other models . . .AC 110 V/AC 120 V to 127 V/
AC 220 V/AC 240 V, 50 Hz/60 Hz
Power consumption
VSX-416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 W
VSX-516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 W
In standby . . . . . . . . . . .0.5 W (AC 220 V/50 Hz)
0
6
11_additional_info.fm 53 ページ ２００６年３月２日 木曜日 午前１０時１０分