Palm Handbook - Manual (Page 11)

Chapter 2 Page 7
11. Select the Modem type and adjust the other options as needed.
Additional settings for the Network Hotsync application
If you want to use the Network Hotsync application to access data,
you will also need to adjust your organizer preferences to use a
network.
Note: Before performing a Network HotSync operation, the
Network HotSync application must be installed, enabled, and
a local HotSync operation must be performed.
Modem Select Palm US/Canada if you are using the
modem in Canada or the US, select Palm U.K.
if you are using the modem in the U.K., or
select a modem type.
The custom setting is for advanced modem
users and is created automatically when AT
commands are entered in the String field.
Note: For the Pilot 1000 or Pilot 5000, select
the Megahertz ® modem
Speed Determines the modem speed for
downloading data. Even though the modem is
rated at 14,400 bps we recommend you choose
57,600 bps to obtain the fastest performance
for your modem.
Speaker Controls the modem speaker volume.
Flow Ctl Regulates the data sent to your modem. When
your modem receives data, it holds the data in
its buffer until the data is ready to be sent. If
your modem receives more data than its buffer
can hold, the modem will use flow control to
temporarily stop data transmission.
String For advanced users only. The field is used for
standard AT commands that enable the
modem to perform special functions.
TouchTone/
Rotary Select the Rotary setting only if you are certain
that your telephone service does not support
TouchTone dialing.