Panasonic BL-C30A - Manual (Page 34)

Operating Instructions
34
2.3 Using Wireless LAN
Wireless communication is possible by adjusting the settings of the wireless LAN
to those for the router. Take a note of the settings and save them for reference. For
more information about wireless setting, please refer to http://panasonic.co.jp/
pcc/products/en/netwkcam/
1. Click [Wireless] on the Setup page.
2. Set each parameter for the Wireless Configuration.
Setting Description
SSID • The SSID must be set to match the SSID your router or
wireless LAN uses. The SSID is limited to 32 characters
(alpha numeric) and is case sensitive.
Communication
mode • In "802.11b", there are a lot of 802.11b-compliant products
and they are inexpensive. They are widely prevalent, so
"802.11b" is useful when using your existing wireless
devices.
• "802.11b/g" supports both 802.11b and 802.11g wireless
LAN standards. It is the communication mode that is easy
to install on your existing wireless LAN.
• "802.11g exclusive" communicates using 802.11g only. It
does not support the mixed standard mode of 802.11b/g,
so it allows the use of original features of 802.11g.
*1
*1 Even if "802.11g exclusive" is in use, the existence of other wireless devices using 2.4
GHz bandwidth —including 802.11b wireless devices— makes the baud rate of 802.11g
slower.