Poulan Pro PP2000T - Manual (Page 5)

5
OPERATION
KNOW YOUR CULTIVATOR ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CULTIVATOR ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself
with the location of the various controls and adjustments. Save this manual for future reference.
Cutting Tines
Shaft
Hanger
Tine Guard
CUTTING TINES
The CUTTING TINES are designed to loosen
soil.
NOTE: The cutting tines can not be turned
by hand due to the gear ratio.
TINE GUARD
The TINE GUARD provides partial protection
from the rotating tines.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Edger PPB1000E . . . . . . . . . . . . . . . . . . . . . .
Blower PPB3000B . . . . . . . . . . . . . . . . . . . . .
Pruner PPB5000P . . . . . . . . . . . . . . . . . . . . .
Pruner PPB5500P . . . . . . . . . . . . . . . . . . . . .
Brushcutter* PPB4000C . . . . . . . . . . . . . . . .
*not designed for use with electric powerheads
WARNING: Always disconnect pow-
erhead spark plug (or disconnect powerhead
from power source) before removing or instal-
ling attachments.
REMOVING ATTACHMENT
CAUTION: When removing or installing at-
tachments, place the powerhead and attach-
ment on a flat surface for stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Attachment
Coupler
Knob
LOOSEN
TIGHTEN
2. Press and hold the locking/release button.
Locking/Release
Button
Coupler Upper Shaft Attachment
3. While securely holding the upper shaft,
pull the attachment straight out of the cou-
pler.