Pioneer V7400 - Manual (Page 3)

DESCRIPTION
All the controls and DVD information are independent for each DVD player.
A. DVD Number with DVD Title
By double clicking a DVD control frame (but not the controls on it) a widow will pop-up
allowing naming and editing DVD title. Up to 20 characters allowed.
B. Start Time
Sets the time that will make DVD player go to play mode. If incorrect time was entered, once
the box loses focus (by pressing anything else), its background will turn orange. Timer has
one-second resolution.
C. Current Frame
Displays current frame number. The current frame number is received from DVD player. If
any button on DVD player is pressed or its interface is used, program will follow and display
incoming frame number.
D. Elapsed Time
Displays elapsed time. The elapsed time is received from DVD player. If any button on DVD
player is pressed or its interface is used, program will follow and display incoming elapsed
time.
E. Remaining Time
Displays time remaining to the end of current title. It is being calculated out of total frame
number, current frame and current frame rate (25(PAL), 30 (NTSC) or Auto)
F. DVD Controls
In order: Scan Reverse, Step Reverse, Play, Still, Pause, Step Forward, Scan Forward.
Pressing Play, Stop or Pause will illuminate them to mark the mode of DVD player. If any
button is pressed on the DVD player device or its interface is used, appropriate button will
illuminate to mark current mode (Play, Still and Stop only)
G. DVD View Selection Buttons
Available in compact view only. In Dual View mode (not shown), two DVD control frames
are displayed next to each other (left-right). Displayed DVD number can be chosen from the
menu or with function keys (F1-F4 for the left side and F5-F8 for the right). Not two same
DVD control frames can be shown on both sides. For both modes, dual and compact, timer
function is operational even if DVD control is not visible.
3