PYLE Audio PLD7HB - Manual (Page 2)

2 1
OPERATING INSTRUCTIONS
Thank you for purchasing headrest monitor. Please read this manual
carefully before operating and reserve it for future reference. It will be
helpful to you if you encounter any operational problem.
2. PART NAMES AND FUNCTIONS
USE INSTRUCTION
1. Please connect the power line and the video line for the unit and
power box.. Putting through the nine core cables of the unit to the
nine core connector on the power box. Connect the audio and
video with AV IN on the box. Connect the DVD output signal with
DVD OUT1/DVD OUT2 for output signal. Connect the power line,
Red for ACC, Yellow for +12v AND Black for GND.
2. Connect the power wire, turn on the power, it will display the
“DVD” picture.
3. It will be auto identify for the PAL system and NTSC system. If
the connection is correct it will be show the picture with clearly
and colorful.
4. To adjust the brightness, contrast, color, tint for the best result
that you need.
5. This set is with USB transfer line, it will be convenience for
connect with USB driver.
Name: Headrest DVD monitor
Pixel format:1440X234
Resolution
System:
DC+12V /
±
10%
Consumption: 7W
Function: AV+DVD+SD+USB
Picture: 7 inch (16:9)
With function remote control 6M
PAL/NTSC
Power:
SD USB
PLD7HB
MODE
_
MENU AV/DVD +
1
2
16 15
14
13
12
11
10 9 8 7
6
5 4
3
1. MAINLY SPECIFICATION
1. Press to open the monitor,
2. Power: ON/OFF
3. Play: DVD Stop, Press will resume playback
4. Stop: ON Play, Press to stop play.
5. AV/ DVD: AV/DVD selection button
6. IR receiver window
7. Forward
8. REV
9. Next button
10. Previous button
11. +: Volume + or sub manual up
12. Manu: press to manual
13. - : Volume- or sub manual down
14. Mode: Selection for 16:9 or 4:3
15. SD: SD carder reader
16. SUB: Mini USB connector