Power Acoustik PMD-90CM - Manual (Page 14)

DVD Setup
General Setup
1. TV Aspect Ratio
In the Setup function called TV Display, you set the player to output the video signal at the
same aspect ratio as your monitor. If the monitor is widescreen format, select
WIDE.
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B
(Letterbox).
“ ”
“ ”
Normal / PS 4:3 PAN SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won t be seen)
Normal / LB 4:3
Choose this setting if you want to see the movie in its original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This opition is available only if the disc has a 16:9 display aspect ratio.)
2. Angle Viewing
Some DVD discs contain programming which allows you
to view a scene from a few different camera angles. You
can tell when a scene is so recorded when an
Angle Mark
is displayed on the screen. This mark will only appear if you
have enabled the Angle Mark feature
in the DVD Setup menu.
“ ”
On: When selected, the screen will be shown with
angle mark.
Off: When selected, no angle mark is shown on
the screen.
3. OSD Language
Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
14
Angle Mark Angle Mark
OSD Lang
OSD Lang
Screen Saver
Screen Saver
On
ENG
On
Set TV Display Mode Set TV Display Mode
General Setup Page General Setup Page
Normal/LB
Wide
TV Display TV Display PS Normal/PS
OSD Lang OSD Lang
Screen Saver
Screen Saver
ENG
On
Set Angle Mark Set Angle Mark
General Setup Page General Setup Page
Off
TV Display TV Display PS
Angle Mark Angle Mark On On
Screen Saver Screen Saver On
Set OSD Language Set OSD Language
General Setup Page General Setup Page
TV Display TV Display PS
Angle Mark Angle Mark On
OSD Lang OSD Lang ENG
English
Korean
French
German
Italian
Spanish
Por tuguese
Dutch English
Korean
French
German
Italian
Spanish
Por tuguese
Dutch
DVD Functions
Subtitle(SUB-T)
This button is used to select the language for the on-screen display system.
(This title menu may vary, depending on the particular DVD.)
[DVD]
OSD
1 / 2
Title
Slow( )
27
Used to display the title menu of the loaded DVD disc.
This function is only present on discs which support it.
[DVD]
[DVD]/[VCD] CONDITION
1 / 4
1 / 8
2X slow forward
4X slow forward
8X slow forward
，
Use this button to play a disc in slow-forward or
slow-reverse. Slow playback can be done at five
different speeds. Pressing this button repeatedly
decreases the speed in steps. Pressing a sixth
time returns playback to the normal speed.
1 / 16
1 / 2
1 / 4
1 / 8
1 / 16
Play
16X slow forward
2X slow rewind
4X slow rewind
8X slow rewind
16X slow rewind
Play
1 / 32 32X slow forward
1 / 32 32X slow rewind