Planet Technology 802.11g Wireless PCI Adapter WL-8317 - Manual (Page 8)

Chapter 2 Installation Procedure
Before you proceed with the installation, please notice following descriptions.
Note1: The following installation operates under Windows XP. The procedure also
applies to Windows 2000 and Vista.
Note2: If you have installed other Wireless PC Card driver & utility before, please
uninstall them first.
1. Turn off your computer and remove its cover.
2. Insert the WL-8317 to an available PCI slot firmly.
3. Secure this card to the rear of the computer chassis and put back the cover.
4. Secure the antenna to the antenna connector on the WL-8317.
5. When system startup, Windows O.S will detect WL-8317 and show you “the Found New
Hardware Wizard”. Please click “Cancel” first.
6. Insert the bundled CD into the CD-ROM driver. The Wizard should run automatically to
display the menu screen.
7. Select suitable utility link according to your system. In this example, Windows
98/ME/2000/XP utility is selected.
8. When the “Software Installation” screen appears, click “Continue Anyway” to proceed.
4