Panasonic 1AG6P1P6073-S - Manual (Page 13)

VQT2Z95
13
Important:
≥ The battery will not be charged if the unit is turned on.
1
Slide the USB terminal slide lever while holding it down.
≥ This pushes the USB terminal cover open deploying the USB terminal.
2
Connect USB terminal of this unit to a PC with a USB
extension cord.
≥ Connect the USB extension cord by inserting it securely all the
way without forcing.
A USB extension cord (supplied)
≥ Do not use any other USB extension cords except the supplied one.
(Operation is not guaranteed with any other USB extension cords.)
≥ Insert the USB extension cord securely all the way.
(The insertion of the plug to the USB terminal of this
unit leaves a gap
B.) It will not operate properly if it
is not inserted all the way.
≥ During charging, the status indicator flashes. When
charging is finished, the status indicator turns off.
Charging the battery
When this unit is purchased, the battery is not charged. Charge
the battery fully before using this unit for the first time.

A Slide the USB
terminal slide lever
until it “clicks” and
locks.


HM-TA1_PP-VQT2Z95_mst.book 13 ページ ２０１０年７月１４日 水曜日 午後５時５０分