Palsonic PDM-103 - Manual (Page 2)

Caution
Listening with the Earphones
Connect the plug of the stereo earphones
(included) or headphone (not included)
into the PHONES socket. Connecting to component audio
system.
Connect the stereo connection cable
(not included) into the LINE OUT socket
of the unit and the CD/AUX inputs of
an audio system.
Always press the power off before making
any connection between the player and
another unit.
Note
Cleaning the Lens
Cleaning the Cabinet
3. EARPHONE AND HI-FI CONNECTION
Avoid excessive volume levels and listening to
sound for a long period of time when using
headphones, as this may impair your hearing.
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral
detergent and water and then wipe dean.
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the
disc cover and clean the lens as follow :
Using a camera lens brush/blower, blow on the lens couple times, then wipe it lightly with the
brush to remove dust. Then, blow on the lens once more.
If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting in the middle
and working to the outside edge.
4. PLAYER MAINTENANCE
Fingerprints
Dust or Dry Particles
6 5
2 x LR6 "AA" alkaline battery
- DC in 4.5V jack accepts AC power adaptor
(centre positive)
Approx. 136(W) x 30(H) x 150(L) mm
Approx. 250g not battery
Battery
Line output: 600Vrms (47K
Headphone: 16mW (32
Wave length: =780mm
Emission duration: continuous
Laser output: <44.6uW Properties
6. PRODUCT SPECIFICATIONS
Dirty or defective disc
Dirty pick up lens
Player is subject to excessive vibration or shock
Low battery power
Poor Earphone connection
Cleaning the Disc
System Compact disc digital audio system
Error correction Cross-interleave Reed-solomon code
Power requirements
Power consumption
Dimension
Weight
0.8W (DC 3V) UNDER NORMAL CONDITION
PICK- UP
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out
Laser diode Material: GaAIAs
AUDIO
D/A conversion 16 bit DAC eight times over sampling
Do not use solvents such as benzene petrol, thinner, commercially available cleaners or
anti-static spray intended for analogue discs.
Should you experience difficulties in the use of this player please refer to the following chart
before contacting your dealer or the place of purchase.
Frequency response
Wow and flutter
No. of channels 2 channels (stereo)
Below measurable limits
Troubleshooting Guide
ACCESSORY
Not Included
7 8
Note
5. DISC CLEANING AND TROUBLESHOOTING GUIDE
Points to Check
Disc may be inserted upside down
Disc not mounted correctly on chunk
Dirty or defective disc
Dirty pick up lens
Player lid not closed
Moisture/condensation, allow player to warm up to room
temperature for 60 minutes
AC Power to adaptor switched off
Weak batteries
Auto power off has occurred, press play button to restore power.
Connection is incorrect
Power to external amplifier not switched on
Earphone plug is not firmly inserted into Green Phones socket.
Earphones have been inserted into the Black line output socket. No sound from Earphones
Intermitted Sound
No sound when played
through an external amplifier
Player fails to function
Problem
Output level
Bass boost effect (100Hz) +6db
20-20,000Hz (