Planet Technology Ethernet Over VDSL Converter EV-401S User Manual
Page 7
EV-401M / EV-401S User's Manual
7
central side. If you want to setup one pair of converters for
point-to-point connection then one set must be client mode
and the other one is master mode.
The cable specifications of the connection are listed as
following:
10BASE-T, Category 3, 4 or 5 UTP
100BASE-TX, Category 5 UTP
Ethernet over VDSL, Twisted-pair telephone wires
The two drawings listed below are typical application for
the Ethernet over VDSL converter.
Drawing 1: LAN to LAN connection
Drawing 2: Multi-port Master Connection
Note: Slave device must connect to Master device through
the telephone wire. Slave cannot connect to Slave
and Master cannot connect to Master. EV-401M
works as Master device and EV-401S works as Slave
device.
Multi-Port Master