Palsonic N111 6875PF - Manual (Page 16)

Presetting programs
13
Operations
Firstly, use the Auto search function to preset all active channels in your area automatically.
Then arrange the preset channels with the manual search and program edit functions.
Press the MENU button to select PRESET menu.
Press CH+/- to select AUTO SEARCH.
Press VOL+/- and the TV set starts Auto channel preset. All
active channels will be preset and stored into the memory
automatically. After presetting, the TV will display the first channel.
During the process of Auto channel preset, pressing the MENU
button will stop the process.
Note: Before you start Auto Search, we recommend you to
set a proper Sound system and Colour system according to
your local area.
If desired channel can not be preset by Auto search or if you
would like to preset channels to specific position numbers one
by one, use manual search function.
Access the PRESET menu, then select PROGRAM item by
CH+/- and set the desired channel number (from 0~199) by
VOL+/- or Digit buttons.
Press CH+/- to select MANUAL SEARCH item. Press VOL+
button, the set searches towards higher frequency. Press
VOL- button, the set searches towards lower frequency.
The search stops when a program is found and this program
will be stored in the specified position number.
You can use band selection to quicken search process. Select
BAND item and press VOL+/- buttons. The band switches
among V-L, V-H and UHF. Then select MANUAL SEARCH
item and press VOL+/- buttons to start manual search.
Repeat the above steps if you want to store another program
in other position number.
Manual Search
Auto Search
PROGRAM
TYPE
BAND
SKIP
FINE TUNE
MANUAL SEARCH
AUTO SEARCH 008
USER2
V-H
OFF
ADJ SEL
PROGRAM
TYPE
BAND
SKIP
FINE TUNE
MANUAL SEARCH
AUTO SEARCH 008
USER2
V-H
OFF
ADJ SEL
PROGRAM
TYPE
BAND
SKIP
FINE TUNE
MANUAL SEARCH
AUTO SEARCH 008
USER2
V-H
OFF
ADJ SEL