Pioneer XV-HTD340 - Manual (Page 19)

Connecting up 02
19
En
• It’s also possible to fix the AM antenna to a
wall using two screws (see illustration
below). Before fixing, make sure that the
reception is satisfactory.
FM wire antenna
• Connect the FM wire antenna to the FM
UNBAL 75 Ω terminal in the same way as
the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don’t drape
loosely or leave coiled up.
• The signal ground ( ) is designed to
reduce noise that occurs when an antenna
is connected. It is not an electrical safety
ground.
Connecting the power
Before connecting the power and switching on
for the first time make sure that everything is
connected properly.
1 Plug one end of the supplied power
cord into the AC INLET.
2 Plug the other end into a household
power outlet.
• See Connecting auxiliary components on
page 71 for details of other connections
you can make with this system.
ANTENNA
AC IN
AM LOOP
ANTENNA
FM
UNBAL
75
Power outlet
XV-HTD340.book 19 ページ ２００３年１２月２７日 土曜日 午前１０時３０分