Panasonic EB-SA7 EN - Manual (Page 108)

105
Settings
Connectivity
Infrared
You can transfer data between your phone and other infrared
enabled devices using an infrared wavelength connection.
You can send Contacts card, calendar events, and pictures/sound
clips/video clips stored in My Media.
Preparing for infrared connection
Place your phone and the other device
within the effective range of 20 cm.
• Verify there are no obstructions
between the two devices. Nearby
activated infrared devices may cause
interference.
• Ensure that the infrared ports of the
devices point at each other.
• On the receiving device, activate the Infrared port.
• If the other device is a computer, you need to set up infrared
connection on the computer. (Example: For Windows XP, Start >
Control Panel > Printers and Other Hardware > Wireless Link >
Infrared tab > All others to send files to your computer using
infrared communications)
Note: Some downloaded files may be protected under copyright laws.
These files should not be sent.
Caution: Though invisible to the eye, do not point the infrared beam at
anyone’s eyes.
Infrared Port