Planet Technology FNSW-1608PS - Manual (Page 61)

- 61 -
Table 4-26 Descriptions of the POE Setting Web Page Screen Objects
Object Description
Power limit mode
Allow to configure power limit mode of Web Smart PoE Switch. It can choose :
„ Port Priority Deliver PoE power by port priority setting
„ Total Limit. Set limit value of the total POE port provided power to the PDs.
For Web Smart PoE Switch, the total PoE power reservation from Port-1~8 is up to 110 watts
Power reservation Show the total watts usage of Web Smart PoE Switch.
Port Indicate the PoE port from 1 to 8.
PoE Function Allow disable or enable the PoE function.
Priority Allow assign port priority for the POE power management
It can choose the “port priority”, value range from “1~4” and the High priority is “1”.
Device class Class 0 is the default for PDs. However, to improve power management at the PSE, the PD may
The PD is classified based on power. The classification of the PD is the maximum power that the
PD will draw across all input voltages and operational modes. A PD shall return Class 0 to 3 in
accordance with the maximum power draw as specified by Table 4.1.
opt to provide a signature for Class 1 to 3.
Current(mA) It shows the PoE device current Amp.
Consumption [W] It shows the PoE device current watt.
Power Limit It can limit the port PoE supply watts.
Per port maximum value must less 15.4, total ports values must less than the Power Reserva-
tion value.
Once power overload detected, the port will auto shut down and keep on detection mode until
PD’s power consumption lower than the power limit value.