Pioneer AVIC-Z120BT - Manual (Page 79)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
Starting procedure
1 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 77.
2 Tap [FM] on the left edge of the screen
to display the
“FM” screen.
3 Use the touch panel keys on the screen
to control the radio.
= For details, refer to Using the touch panel
keys on the next page.
Reading the screen
1
2 3 6 5 4 7
8
9
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Program service name indicator
Shows the program service name (station
name) of the current station.
4 Signal level indicator
5 Frequency indicator
6 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
7 Current time
8 Program service name or frequency indi-
cator
Shows the frequency of the preset item. If the
program service name can be obtained, the
program service name is shown instead of the
frequency.
9 Preset number indicator
Shows what preset item has been selected.
En
79
Chapter
14
Using
the
radio
(FM
)
Using the radio (FM)