Patton electronic SL4050/B2/E - Manual (Page 42)

Network Settings 42
SmartLink 4050 Series Getting Started Guide 5 • Using the configuration menu
Network Settings
Figure 11. Network Settings window
Click on Network Settings to display the configuration window (see figure 11 ). Select the method used to con-
nect to the Internet:
• DHCP—Select DHCP if you have cable Internet (see section “DHCP” for details)
• PPPoE—Select PPPoE if your ISP uses PPPoE (most DSL users choose PPPoE) (see section “PPPoE” for
details)
• Static IP—Choose the Static IP network setting if the wide area network IP address is provided to you by
your ISP (see section
“Static IP” for details)
DHCP
Click on Dynamic host configuration protocol (DHCP) for IP address information that is obtained automati-
cally from your ISP. The DNS Server information is obtained from your ISP.
Figure 12. DHCP configuration window