Other functions, Switching the status display off or on, Continuous playback – Polycom VIDEOPLUS VR630/07 User Manual
Page 25: Blue background on or off, Automatic switch-off
25
EN
Switching the status display off or
on
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen. You can
switch off the information about the operating
status so that the status display is not recorded
when copying videocassettes.
1.
1.
Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press
. The main menu will appear.
3.
3.
Select 'VCR SET UP' with
and
confirm with
.
4.
4.
Select 'STATUS DISPLAY' with
.
5.
5.
Select 'ON' or 'OFF' with
.
6.
6.
To end, press
.
Continuous playback
This function can be used to play a cassette
over and over again. When the end of the cas-
sette is reached, the video recorder will rewind
and start from the beginning again. This function
is activated or deactivated as follows.
1.
1.
Press
. The main menu will appear.
2.
2.
Select line 'VCR SET UP' using
and confirm with
.
3.
3.
Select 'REPEAT PLAY' using
.
4.
4.
Select function 'ON' with
.
If you select 'OFF', continuous playback will be
switched off.
5.
5.
To end, press
.
6.
6.
Insert a cassette.
7.
7.
Start the continuous playback with
.
Blue Background on or off
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
. The main menu will appear.
3.
3.
Select 'VCR SET UP' using
and
confrim with
.
4.
4.
Select 'BLUE BACKGROUND' using
and confirm with
.
5.
5.
Select 'OFF' (no blue background) or 'ON'
(blue background on) with
.
If you select 'OFF', the menu display will disap-
pear.
6.
6.
To end, press
.
Automatic switch-off
If you haven't used the video recorder for a few
minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel
this function to use the video recorder as a tele-
vision receiver.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
. The main menu will appear.
3.
3.
Select 'VCR SET UP' using
and
confrim with
.
B 1
L C
K B
MENU
STATUS/EXIT
B 1
B 1
L C
K B
B 1
L C
K B
MENU
K B
STATUS/EXIT
B 1
L C
K B
B 1
L C
K B
MENU
STATUS/EXIT
B 1
L C
K B
B 1
L C
K B
MENU
8. Other functions
SELECT K L CHOOSE B
REPEAT PLAY
[ON]
→STATUS DISPLAY
[ON]
BLUE BACKGROUND[ON]
AUTO STANDBY
[OFF]
END=EXIT
Which settings can I choose?
'ON': Shows the status display for a few sec-
onds only.
'OFF': Switches off the status display.
SELECT K L CHOOSE B
→REPEAT PLAY
[ON]
STATUS DISPLAY
[ON]
BLUE BACKGROUND[ON]
AUTO STANDBY
[OFF]
END=EXIT
Using 'Tape List'
To save a recording in 'Tape List' or to use a
'Tape List' cassette, enter the cassette number
using .
You can find more information on 'Tape List' in
the chapter 'Tape List'.
0..9
SELECT K L CHOOSE B
REPEAT PLAY
[ON]
STATUS DISPLAY
[ON]
→BLUE BACKGROUND [ON]
AUTO STANDBY
[OFF]
END=EXIT
VR630/07 02.2.6 10:13 AM Page 25