Philips CD280 - Manual (Page 32)

32 EN
From the base
To start/Stop listening, press • .
To adjust the volume, press • / .
To play the previous message/Replay the •
current message, press .
To play the next message, press • .
To delete the current message, press • .
Note
No deleted messages can be recovered. •
From the handset
1
Select [Menu] > [Answ. Machine] >
[Play], then press [OK] to confirm.
New messages start playing. Old »
messages start playing if there is no
new message.
Press
• [Back] to stop listening.
Press • [Option] to enter the options
menu.
Press • / to increase/decrease the
volume.
Delete an incoming message
From the base
Press when you listen to the message.
The current message is deleted. »
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to confirm.
» The current message is deleted.
Delete all old incoming messages
From the base
Press and hold in standby mode.
All old messages are permanently »
deleted.
From the handset
1
Select [Menu] > [Answ. Machine] >
[Delete all], then press [OK] to confirm.
The handset displays a confirmation »
request.
2
Press [OK] to confirm.
All old messages are permanently »
deleted.
Note
You can delete the read messages only. No •
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press to pick up the call.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Select [Menu] > [Answ. Machine] >
[Ring delay], then press [OK] to confirm.
2
Select a new setting, then press [OK] to
confirm.
The setting is saved. »
Note
Ensure that the answering machine is switched •
on before this feature can be applied.