Planet Technology Multi-Port Fast Ethernet Print Server FPS-3121 - Manual (Page 11)

11
8. In the system default, IPX and NetBEUI are enabled. But the Peer-
to-Peer printing is not support those protocols, so it will show those
protocols are not supported. About the TCP/IP, you can either assign
a fixed IP address for the print server or configure it later by the
configuration utility. Please click “Next”.
9. Configuration summary will display in this screen. Now, you have
completed the “Print Server Setup”. By clicking “Finish”, your system
will perform “Add network port” of the print server to your PC.